This offer is for a 1 Litre Polyethylene measuring jug with metric graduations.
1 Metre Plastic Brake Hose
10mm fitting
INTERNAL THRUST WASHER 1.5mm Thick for V Clutch Material Harded Steel Part Number: BTVCLUTTWIN15 Genuine TKM part, legal for racing. 1.5 Thrust Wa...
View full detailsGenuine TKM part, legal for racing.
1.8M Outer Cable With M6 Adjusters Each End
10 T Front Sprocket (Vortex) 13mm Shaft
Please note this is for the drum only NEW heat treated silver version Included is the 10t 40/41 pitch sprocket, please not circlip is not included
Sprocket only to fit onto a MaxTorque clutch, replacement only for a 10t 420 pitch clutch.
The Red Plastic Pneumatic Trolley Wheel, sized 3.00-4 with a 20mm axle bore and a 75mm through hub, is a top-tier choice, especially crafted for yo...
View full details100Cc Wet Box O-Ring Holder
This offer is for a 10 Litre Jerry Can.
10mm / M10 King Pin Bolt
L/H thread. Main thread part is 30mm. Whole end is 63mm x 28mm.
Small Bumper Bush 10mm
R/H thread. Main thread part is 30mm. Whole end is 63mm x 28mm.
DOT 1This gives you the least possible amount of castor for the TonyKart / OTK chassis. The higher the number goes the MORE castor you gain.DOT 2Fo...
View full details10mm high quality bearings (10mm x 22mm x 6mm) Part of The Karters Club collection, which is the biggest collection of nuts, bolts, washers, spri...
View full details10 x 25mm Stub Axle Spacer
11 T Front Sprocket (Vortex)
12t Centrifugal Clutch to fit a 3/4" (19.05mm) Crank Shaft with a 3/16 Key Slot The clutch starts to engage at 1800 rpm and becomes fully locked a...
View full detailsMax-Torque 12t 428 Pitch Complete Clutch.
Suitable for the Max-Torque inner hubs only
